Mobeye i110 Manual do Utilizador descarregar pdf (Página 8)

The Mobeye

first prepares the programming mode. The light flashes red (interval ca. 1 sec). As soon

as the light turns green, the Mobeye

is able to receive SMS-messages.

In order to program the extra message text, send an SMS in following structure:

 <user code>.name.xxxxxx.

Please regard the dots between and behind the commands, command ‘name’ in small letters!

Example: enter the text ‘boat evergreen’ (e.g. user code 1111)

 1111 .name.boat evergreen.

You will hear two short beeps in case of a correct command.

Leave the menu by pressing “OK” twice.

3.4 TELEPHONE NUMBERS

The SMS alarm message and voice (‘alarm signal’) message can be sent to one or two telephone

number. At least one telephone number must be entered in the Mobeye

. The test messages and low

battery messages are sent to the first programmed telephone number.

3.5 ALARM TYPE

As factory default the Mobeye

will send an SMS text message and call to the set contact persons

after an intruder or temperature alarm. It is possible to change this to only an SMS or only a call.

For this setting please choose between option 0, 1 or 2, as explained in the table.

MESSAGE

TYPE

Options

Intruder alarm

SMS

●

○

Call

●

○

●

Temperature

alarm

SMS

●

Call

●

○

●

‘Battery low’ *

SMS

●

Test message *

SMS

●

*only to first contact person

1 2 3 4 5 6 7 8 9 10 11 12 13

Comentários a estes Manuais

Sem comentários

Mobeye i110 Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Mobeye i110