Mobeye i110 Manual do Utilizador descarregar pdf (Página 7)

3. MOBEYE SETTINGS

The Mobeye

settings can be added via the keypad and SMS text messages. First the method of

programming is discussed, next the explanation of the settings.

3.1 CONFIGURATION

To change the settings, please follow the instructions:

 Enter your 4-digit personal code

 Press “menu” -> light turns green

 Enter the menu number belonging to the setting to be changed.

 Press “OK”

 Enter the new setting

 Press “OK”. The light switches off, a confirmation melody is played

In case of false entries, the light turns red and a short beep will sound. The menu can be left from any

position, by twice pressing “OK”.

Following settings are possible:

Menu nr

Description

Options

Factory setting

Change user code

4 digit code

1111

Change 1

tel.nr.

Tel. number (0 to delete)

Change 2

tel.nr.

Tel. number (0 to delete)

Sensor sensitivity

1,2

1 (high)

Entry delay

15, 30, 45 or 60

15 (sec.)

Interval test message

0-30 (days)

0 (no message)

Entry indication

0 (off), 1 (on), 2 (LED)

Siren

0 (off), 1 (on)

Change minimum

temperature

000-050 (0 until 50ºC)

110-101 (-10 until -1 ºC)

999 = off

999

Change maximum

temperature

000-050 (0 until 50ºC)

110-101 (-10 until -1 ºC)

999 = off

999

Correction factor temperature

01-09 (+1 to +9 ºC)

11-19 (-1 to -9 ºC)

00 (no correction)

3.2 USER CODE

The user code is the code for switching on/off the active status. In the active status the Mobeye

will

detect movements. The user code is also needed to program the settings or activate the special

functions. It is possible to change the user code to any 4-digit number.

In case the user code is entered incorrectly 3 times, the indicator turns red and the Mobeye

will be

blocked during 10 minutes.

3.3 SMS RECOGNITION TEXT

It is possible to send an extra text in the SMS text messages, in order to recognize from which

Mobeye

the message has been sent. The first part of the SMS text message will always contain

standard text like ‘Mobeye alarm’, or ‘Test message OK’. The recognition text will be written after the

standard text.

This text (max. 20 characters) can be programmed by sending an SMS to the Mobeye

Changing the recognition text cannot be done via the keypad, only via sending an SMS text message.

Switch the Mobeye

into the programming mode. In this mode the GSM module is switched on and is

able to receive messages.

 Enter your 4-digit personal code. (factory setting: “1111”)

 Press “menu”

 Press “21” -> light turns green

 Press “OK”

1 2 3 4 5 6 7 8 9 10 11 12 13

Comentários a estes Manuais

Sem comentários

Mobeye i110 Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Mobeye i110